Flat plate solar system/solar water heating system/solar heating system
Flurosorb Flat Plate collector
The Flurosorb Flat Plate gives you high efficiencies from a large absorber area of 2.02m2, robust construction from toughened glass and ultrasonic welding, whilst the slimline frame gives a total footprint of just 2.24m2. The neat design subtly fits in with the roof with low protrusion making it well within the threshold normally required for planning permission and at 43kg it is one of the lightest flat plates on the market.
Construction:
Brushed aluminum frame
Grid absorber made of copper
Solar glass thickness 4mm (tough and resistant to vandalism)
Absorber ultrasonically welded and not soldered, suitable for
High temperature
High selective absorber coating
Dimensions:
Dimensions 1.16x1.93m
Gross collector area 2.24m2
Absorber surface areas 2.02m2
Low flat plate weight only 43kg
Total depth 110mm achieving low protrusion
Performance:
Leading performance flat plate collector
Collector efficiency η 81.8%
Light transmission 91%
Solar radiation absorption 95%
Solar radiation emission 5%
Shutdown temperature 196 C
60mm insulation for improved efficiency
Fixing:
Horizontal and vertical orientation possible
Mounting accessories for pitched roofs (On-roof and in-roof)
A-frame for flat roofs
Flurocyl twin coil cylinder
Unvented, stainless steel and narrow enough to fit through any standard airing cupboard door, the Flurocyl twin coil cylinder ensures that every last bit of the suns energy is used and a high volume of domestic hot water is provided all year round.
Twin coil Flurocyl cylinder fully compatible with all open vent and sealed systems, including the full range of Glow-worm boilers
Available in 200, 250 and 300 litres
High grade stainless steel cylinder with laser welded seams
Insulation meets CHeSS best practice (loss as low as 1.9kWh)
25 year warrantee in cylinder shell
554mm width for flexible siting
3kW immersion heater as standard
3 thermal cut outs (boiler, immersion and solar)
Supplied with a carrying handle for easy of transportation
Fluropro controller
The Fluropro controller is the real brains of the operation, simple to use with a boiler domestic hot water programmer and solar gain display to show how much energy has been collected from the sun since the system began operating. Intelligent functionality holds off the boiler whenever there is solar gain to be had making fossil fuel usage as low as possible.
Differential temperature control
East / West system control (additional collector sensor and pump
Station connection)
Solar gain display
Temperature sensors
Three channels (solar, boiler, auxiliary heating)
Programmable boiler & auxilary channels
Easy wiring connections
Solar gain modulation
Boiler heating delay function (similar to optimum start)
Solar Pump Station
The Solar Pump Station pumps the solar fluid from the flat plate to the cylinder and back again. Its compact design fits easily on the wall in the house or loft. The Three speed pump enables you to match the flow rate of the system to a wide range of properties.
Model |
IPFT-100-GS/SS |
IPFT-150-GS/SS |
IPFT-200-GS/SS |
IPFT-300-GS/SS |
flat
plate
solar
collector |
quantity
dimensions
light area
coating
header
insulation |
1
1,030*2,030mm
1*2.00
selective absorbing
Cu 22 mm
Glass wool |
1
1,030*2,030mm
1*2.00
selective absorbing
Cu 22 mm
Glass wool |
1/2
1,030*2,030mm
1/2*2.00
selective absorbing
Cu 22 mm
Glass wool |
2/3
1,030*2,030mm
2/3*2.00
selective absorbing
Cu 22 mm
Glass wool |
water
tank |
capacity
diameter
operating pressure
insulating layer
insulation thickness
connections
inner material
outer material |
100L
540mm/580mm
6bar
polyurethane
50mm
3/4″
SUS 304/SUS316L
color steel/SUS |
150L
540mm/580mm
6bar
polyurethane
50mm
3/4″
SUS 304/SUS317L
color steel/SUS |
200L
540mm/580mm
6bar
polyurethane
50mm
3/4″
SUS 304/SUS318L
color steel/SUS |
300L
540mm/580mm
6bar
polyurethane
50mm
3/4″
SUS 304/SUS319L
color steel/SUS |
support |
material
Anti-corrosin
use |
hot Galvanized steel
Powder coated
Flat and slope roof installation |
connection
pipe |
Material
Diameter
insulating material
insulation thickness |
flexble stainless steel pipe
DN20-3/4″
elastomer rubber with protective PE film
20mm/13mm |
|
|
|
|
|
|
|
|