Pressurized solar water heater(thermosiphon) provide energy and get hot water by a efficient coppper coil fixed in water tank. Different from other common solar water heaters, this type could be used pressurized. As water in tank can store energy, when cold water goes through copper coil, it could absorb heat from water in tank. The copper coil is20-60 m long.
Tank installation should be according to local condition. Thermosiphon solar water heater system is suitable for family, swimming pool, solar water furnace system and floor heating. It is suitable in areas with cold weather and bad-quality water. It could be used as pressurized system, with much lower price than solar water heater with pressurized water tank.
1. Outer tank: Colourful steel(galvanized steel) or stainless steel 3042B(BA), outer diameter: 470mm
2. Inner tank: Stainless steel SUS304 2B, thickness: 0.5mm. Inner diameter: 360mm
3. Copper Coil Heat Exchager: φ 12*1mm
4. Vacuum tube: High-efficient vacuum tube (58mm 1800mm). Hail resistance: 25mm
5. Insulation: 55mm polyurethane
6. Frame: Galvanized steel or stainless steel. Angle: 20-80 degree.
7. If you need 3 layer tube, price will add $0.30/tube 8. If thickness of inner tank add 0.1mm, price will add $0.36/tube
9. If you need reflector, price will add $0.45/tube
Certificate: Solar Keymark CE ISO9001
| Model |
ZhiZhun Series |
| Water tank |
Inner tank: stainless steel SUS304-2B,1.2mm thickness, 360mm |
| Outer tank: galvanized steel,0.4mm thinckness, 470mm |
| Insulation: polyurethane foaming, 55mm thickness |
| Max working pressure: 6 Bar |
| Heat preservation: 72 hours |
| Capacity:180L |
| Vacuum tube |
Structure: all-glass double-tube co-axial structure |
| Material: borosilicate glass 3.3 |
| Coating: AL-N/SS/CU |
| Sediment method: 3 target magnertron sputtering plating |
| External pipe: Φ 58mm, Internal pipe: Φ 47mm, Length:1800mm, thickness:.1.6mm |
| Heat pipe:condenser Φ 14mm, pipe body Φ 8 mm, Header pipe Φ 35mm.thickness 1.0mm. |
| Vacuum tightness: P ≤ 5.0*10-3Pa |
| Absorption Rate: 93%~96% (AM1.5) |
| Emission Rate: 4%~6% (80 ° C ± 1.5 ° C) |
| Frame |
Galvanized steel,1.5mm thickness, 100mm*100mm |
| Angle: 45 ° |
| Accessories |
Fasteners: stainless steel screws |
| 1500 kw electrical heater as back up |
| Sealing ring: silicone rubber |
| Warranty |
5 years |
){kind=link}