Split non pressure solar water heater1. Simple Installation, No Maintenance, Effective operation
2. Easy Retrofitting To Existing systems
3. Suitable for single and multiple solar heating Application systems,
4. Preferred option for extremely cold areas and questionable water quality.
5. Incoming potable water is routed to the solar storage tank
6. Porcelain Enemal or SUS316 Stainless Stee Storage Tank with Electrical or gas Back Up
7. Double-walled Copper Coil heat exchangers in storage tank prevent contamination of household water.
Specifications: <o: P>
1) inner manifold: Copper header
2) outer manifold: Aluminum painted un-oxygen layer
3) Insulation: Rock wool
4) Rubber Seals and Rings: UV stabilized high temperature silicon rubber
5) Optimal installation angle: 20-80 degree
6) Maximum Operating Pressure: 0.6-0.8 MPa
7) Optimal flow rate: 0.1L/min/tube - 0.026G/min/tube
8) Glass tube dimensions: 47mm x 1.5m x 10-36 pcs 58mm x 1.8m x 10-36 pcs
9) Heat pipe material: Copper
10) Heat preservation: 72hrs
11) Hail resistance: 25mm
12) Inlet & Outlet: Ø 22 or 3/4 inch<o: P>
Detailed Product Description: <o: P>
1)solar collector is designed with pressure up to 0.8Mpa.
2) Easy to use, also convenient to install
3) Can be put in the courtyard, on the roof or balcony
4) Inlet water hole connects to the tap water, and the outlet hole connects to the tap water, and the outlet hole produces pressure hot water directly
5) Efficiency: The advantage of solar tubes is that insulate the inner tube from heat loss. This means that once heat is absorbed, it is transferred to the water in the manifold, and not lost to the outside environment. This is the key difference between solar tubes and flat plate solar collectors: The insulative properties. Combined with heat transfer efficiency of the heat pipe, the collector can deliver excellent heat output all year round.
6) Aesthetics: Solar collector is designed to be low profile, sitting closed to the surface of the roof. Tubes are black and so blend in nicely with most roof colors.
7) Heat pipe has its special principle and function, and no water in the pipe. If one of the pipe is broken, the heat collector still could be used normally. <o: P>
Model |
Capacity |
Heat Pipe vacuum tube solar collector |
Pump station |
Expansion tank |
Connection fittings |
Loading quantity |
Model |
Quantity |
20GP |
40HQ |
IPSV100-NC/SC |
101L |
IPRB A 581810 |
1 |
SR881/882
SR961/962
SR971/972
SR981/982 |
5L |
Copper tee air vent 22mm couple P/T valve Check valve |
46 |
11 |
IPSV150-NC/SC |
150L |
IPRB A 581815 |
1 |
8L |
33 |
79 |
IPSV200-NC/SC/DC |
200L |
IPRB A 581820 |
1 |
12L |
26 |
64 |
IPSV250-NC/SC/DC |
250L |
IPRB A 581825 |
1 |
12L |
22 |
54 |
IPSV300-NC/SC/DC |
300L |
IPRB A 581830 |
1 |
18L |
18 |
44 |
IPSV400-NC/SC/DC |
400L |
IPRB A 581820 |
2 |
18L |
14 |
35 |
IPSV500-NC/SC/DC |
500L |
IPRB A 581825 |
2 |
24L |
12 |
29 |